Microe Mercury II 6000 Uživatelský manuál Strana 5
- Strana / 73
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Before Installation
IM-Mercury_II_6000 Series Rev. 1 Page 4 ©2014 MicroE Systems
Mercury II 6000 Series Encoders
Installation Manual and Reference Guide
2.0 Before Installation
Review the items in this section prior to installing the encoder.
2.1 Power Recommendations
Mercury II encoders require a minimum of 4.75VDC continuously.
When designing circuits and extension cables to use Mercury II encoders, be sure to
account for voltage loss over distance and tolerances from the nominal supply voltage so
that at least 4.75VDC is available to the Mercury II encoder under all operating
conditions.
The input voltage should not exceed 5.25VDC.
2.2 Installation Considerations
The Mercury II encoder is a precision electronic instrument. It has been designed to function in a
wide range of applications and environments. To take full advantage of the Mercury II modular
system design, considerations should be made to allow easy access to the sensor (and
interpolator modules where applicable) for service and/or replacement. For optimal performance
and reliability:
DO follow standard ESD precautions while handling the sensor and interpolator.
DO allow proper clearance for sensor head alignment.
DO follow setup and calibration instructions for the encoder system.
DO, where possible, install the scales in an inverted or vertical position to minimize
accumulation of dust.
DO NOT store sensors in an uncontrolled environment.
DO NOT electrically overstress the sensor (power supply ripple/noise).
DO NOT intentionally “hot swap” the sensor if the device is energized.
DO NOT use in high contamination applications (dust, oil, excessive humidity, or other
airborne contaminants).
2.3 Items Required for Installation
In addition to the items identified in Section 3.0 System Overview, you will need the following
items available for installation:
Items Required for Installation
Item
Tape Scale
Glass Scale
Index and Limit Marker sheets
Hex Wrench for Sensor Mounting Screws
Finger Cots or talc-free gloves
Acetone or isopropyl alcohol
Lint-free cotton cloths or wipes
Two-part epoxy (Tra-Bond 2116 or equivalent)
Stick and disposable surface for stirring epoxy
Shears
Tape Applicator Tool*
Silicone adhesive
Note*: Not required for some installations.
- Mercury II 1
- Series Encoders 1
- Table of Contents 2
- 1.0 Introduction 3
- 1.4 Patents 4
- 1.5 Standards Compliance 4
- 1.6 Related Documentation 4
- 1.7 Manual Revisions 4
- 1.8 Trademarks 4
- 2.0 Before Installation 5
- 3.0 System Overview 6
- II Software 7
- 4.0 Sensor Installation 8
- 5.1.1 Sensor Alignment 10
- Alignment Tool 10
- 5.1.2 Sensor Calibration 12
- 5.2 Using the Software 15
- 7.0 Appendix 21
- II 6000 Series Encoders 22
- Appendix 23
- 7.3 Wiring Diagrams 26
- 7.4 Customer Interface 28
- 7.7 RS-422 Compliance 37
- 7.8 Troubleshooting 38
- 8.0 Order Guide 39
- How to Order 42
- 9.0 Contacting MicroE 43
- PurePrecision 44
- 1.7 Standards Compliance 47
- 3.1 Before Installation 48
- 3.1.4 Design Guide 50
- 3.2 Cut the Tape Scale 52
- 3.3 Install Tape Scale 53
- Installation 57
- The Applicator Tool 58
- Install Tape Scale 60
- 4.1 Before Installation 66
- Linear Glass Scales 67
- 5.1 Stick-On Marker Strips 68
- 5.3 Attach Markers to Scale 70
- 6.0 End Caps Installation 71
- 7.2 Cleaning Scales 72
- 8.0 Contacting MicroE 73
Související produkty a manuály pro Senzory Microe Mercury II 6000
Senzory Microe 1000 Mercury Uživatelský manuál
(14 stránky)
(14 stránky)
Senzory Microe 1500H Mercury Uživatelský manuál
(20 stránky)
(20 stránky)
Senzory Microe 1200 Mercury Uživatelský manuál
(11 stránky)
(11 stránky)
Senzory Microe 3500V Mercury Uživatelský manuál
(14 stránky)
(14 stránky)
Senzory Microe CE300 ChipEncoder Uživatelský manuál
(10 stránky)
(10 stránky)
Senzory Microe 1000V Mercury Uživatelský manuál
(14 stránky)
(14 stránky)
Senzory Microe 1500V Mercury Uživatelský manuál
(19 stránky)
(19 stránky)
Senzory Microe 3500Si Mercury Uživatelský manuál
(21 stránky)
(21 stránky)
Senzory Microe 1500S Mercury Uživatelský manuál
(19 stránky)
(19 stránky)
Senzory Microe Mercury II 6000V Uživatelský manuál
(67 stránky)
(67 stránky)
Grundig LXW826710 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für LCD-Fernseher Grundig LXW826710.
Wir stellen 1 PDF-Handbücher Grundig LXW826710 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt
Komentáře k této Příručce